Optimizing bay dimension in mixed pyramid stacking storage systems

Authors

  • Dong-Won Jang Pusan National University
  • Kap Hwan Kim Pusan National University

DOI:

https://doi.org/10.23055/ijietap.2013.20.1-2.480

Keywords:

Relocation, Unit load, Stacking storage system

Abstract

Pyramid stacking is a type of block stacking method for cylindrical unit loads such as drums, coils, paper rolls, and so on. This study addresses how to determine the dimension (height and width) of a bay. It is assumed that multiple types of unit loads, which have different retrieval rates and duration of stays from each other, are stored in the same bay. A cost model is proposed to determine the optimal dimension of a bay. A numerical example is provided to illustrate the procedure for the optimization in this paper.

Downloads

Published

2013-03-25

How to Cite

Jang, D.-W., & Kim, K. H. (2013). Optimizing bay dimension in mixed pyramid stacking storage systems. International Journal of Industrial Engineering: Theory, Applications and Practice, 20(1-2). https://doi.org/10.23055/ijietap.2013.20.1-2.480

Issue

Vol. 20 No. 1-2 (2013)

Section

Logistics and Material Handling

License

The Author(s) must formally transfer each article's copyright before publication in the INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING. Such transfer enables the Journal to defend itself against plagiarism and other forms of copyright infringement. Your cooperation is appreciated.

You agree that the copyright of your article to be published in the INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING - THEORY, APPLICATIONS, AND PRACTICE is hereby transferred, throughout the World and for the full term and all extensions and renewals thereof, to INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING - THEORY, APPLICATIONS, AND PRACTICE.

The Author(s) reserve(s): (a) the trademark rights and patent rights, if any, and (b) the right to use all or part of the information contained in this article in future, non-commercial works of the Author's own, or, if the article is a "work-for-hire" and made within the scope of the Author's employment, the employer may use all or part of the information contained in this article for intra-company use, provided the usual acknowledgments are given regarding copyright notice and reference to the original publication.

The Author(s) warrant(s) that the article is Author's original work and has not been published before. If excerpts from copyrighted works are included, the Author will obtain written permission from the copyright owners and credit the article's sources.

The author also warrants that the article contains no libelous or unlawful statements and does not infringe on the rights of others. If the article was prepared jointly with other Author(s), the Author agrees to inform the co-Author(s) of the terms of the copyright transfer and to sign on their behalf; or in the case of a "work-for-hire," the employer or an authorized representative of the employer.

The journal does not provide the author copy of the final paper when it is published. The author(s) can make(s) a subscription to INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING - THEORY, APPLICATIONS, AND PRACTICE if they want to get the final paper that has already been published.

The journal is registered with the Library of Congress (ISSN # 1943-670X). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the journal.

The author reserves patent and trademark rights and the right to use all or part of the information contained in the article in future non-commercial works.