A MODEL FOR DETERMINING OPTIMAL BATCH SIZES OF MULTI-FEATURED PRODUCTS WITH RANDOM PROCESSING ACCURACIES UNDER QUALITY AND COST CONSTRAINTS

Authors

  • Dongmin Shin Hanyang University, ERICA Campus
  • Jeongyeon Kim Hanyang University, ERICA Campus
  • Geunho Cho Hanyang University, ERICA Campus
  • Sun Hur Hanyang University, ERICA Campus

DOI:

https://doi.org/10.23055/ijietap.2017.24.1.1903

Keywords:

industrial engineering, production, manufacturing engineering, quality management

Abstract

Determining an optimal batch sizes in a production system that produces defective items has been the primary focus of manufacturing sector. Depending on the proportion of defectives, the amount of optimal batch size also varies depending on several cost factors such as setup cost, order cost, and defective cost. In this paper, models for the optimum batch sizes in a multi-featured products production system have been developed for quality and cost constraints. In determining the optimal batch size of products, we consider two factors the one is tool capability and another is set-up accuracy based on feature. The mathematical structure of this model has been proposed and results are demonstrated through Illustrative examples. And we compared the optimal batch sizes accordance with change in cost ratio.

Author Biographies

Dongmin Shin, Hanyang University, ERICA Campus

Dongmin Shin received the BS and the MSdegrees in industrial engineering fromHanyang University, Seoul, Korea, in 1994,and Pohang University of Science andTechnology (POSTECH), in 1996,respectively. He earned the PhD degree in theDepartment of Industrial and ManufacturingEngineering at the Pennsylvania State University, University Park,USA, in 2005. Currently, he is an assistant professor in theDepartment of Information and Industrial Engineering at HanyangUniversity, Ansan, Korea. He has held a postdoctoral position in theDepartment of Industrial and Manufacturing Engineering at thePennsylvania State University and a research position at HyundaiMotors, Namyang, Korea. His research interests include discrete event system control, computer integrated manufacturing, and human-automationinteraction systems. 

Sun Hur, Hanyang University, ERICA Campus

Sun Hur received his BS and MS degrees fromthe Department of Industrial Engineering ofSeoul National University, Seoul, Korea, in 1983and 1985, respectively. He also received the PhDfrom Texas A&M University, College Station,Texas, USA, in 1993. He worked in SamsungElectronics Co. from 1984 to 1986. He was withthe Industry Research group in Samsung Economic Research Institutefrom 1986 to 1990. He has been a full professor with the Department ofIndustrial and Information Engineering of Hanyang University, Ansan,Korea since 1995. His research interests include stochastic processes,queueing theory, reliability, performance analysis of telecommunicationsystems, and information management

Downloads

Published

2017-09-12

How to Cite

Shin, D., Kim, J., Cho, G., & Hur, S. (2017). A MODEL FOR DETERMINING OPTIMAL BATCH SIZES OF MULTI-FEATURED PRODUCTS WITH RANDOM PROCESSING ACCURACIES UNDER QUALITY AND COST CONSTRAINTS. International Journal of Industrial Engineering: Theory, Applications and Practice, 24(1). https://doi.org/10.23055/ijietap.2017.24.1.1903

Issue

Vol. 24 No. 1 (2017)

Section

Production Planning and Control

License

The Author(s) must formally transfer each article's copyright before publication in the INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING. Such transfer enables the Journal to defend itself against plagiarism and other forms of copyright infringement. Your cooperation is appreciated.

You agree that the copyright of your article to be published in the INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING - THEORY, APPLICATIONS, AND PRACTICE is hereby transferred, throughout the World and for the full term and all extensions and renewals thereof, to INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING - THEORY, APPLICATIONS, AND PRACTICE.

The Author(s) reserve(s): (a) the trademark rights and patent rights, if any, and (b) the right to use all or part of the information contained in this article in future, non-commercial works of the Author's own, or, if the article is a "work-for-hire" and made within the scope of the Author's employment, the employer may use all or part of the information contained in this article for intra-company use, provided the usual acknowledgments are given regarding copyright notice and reference to the original publication.

The Author(s) warrant(s) that the article is Author's original work and has not been published before. If excerpts from copyrighted works are included, the Author will obtain written permission from the copyright owners and credit the article's sources.

The author also warrants that the article contains no libelous or unlawful statements and does not infringe on the rights of others. If the article was prepared jointly with other Author(s), the Author agrees to inform the co-Author(s) of the terms of the copyright transfer and to sign on their behalf; or in the case of a "work-for-hire," the employer or an authorized representative of the employer.

The journal does not provide the author copy of the final paper when it is published. The author(s) can make(s) a subscription to INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING - THEORY, APPLICATIONS, AND PRACTICE if they want to get the final paper that has already been published.

The journal is registered with the Library of Congress (ISSN # 1943-670X). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the journal.

The author reserves patent and trademark rights and the right to use all or part of the information contained in the article in future non-commercial works.

Similar Articles

1 2 > >> 

You may also start an advanced similarity search for this article.